Ligand effects, solvent cooperation, and large kinetic solvent deuterium isotope effects in gold(I)-catalyzed intramolecular alkene hydroamination

• Ruichen Lan,
• Brock Yager,
• Yoonsun Jee,
• Cynthia S. Day and
• Amanda C. Jones

Beilstein J. Org. Chem. 2024, 20, 479–496, doi:10.3762/bjoc.20.43

• both within the context of a classic gold π-activation/protodeauration mechanism and a general acid-catalyzed mechanism without intermediate gold alkyls. Keywords: alkene hydroamination; general acid catalysis; gold catalysis; isotope effect; phosphine ligand effect; solvent effect; Introduction

• )-catalyzed alkene hydroamination were intermolecular additions by He [15][16] and intramolecular additions by Widenhoefer [12][13] in 2006, each catalyzed by phosphine ligand supported gold triflate (Ph3PAuOTf). Shortly after, arguments were made that reaction profiles were indistinguishable from those

Mono or double Pd-catalyzed C–H bond functionalization for the annulative π-extension of 1,8-dibromonaphthalene: a one pot access to fluoranthene derivatives

• Nahed Ketata,
• Linhao Liu,
• Ridha Ben Salem and
• Henri Doucet

Beilstein J. Org. Chem. 2024, 20, 427–435, doi:10.3762/bjoc.20.37

• derivatives (Scheme 1b) [21]. In the course of this reaction 20 mol % of Pd catalyst, 50 mol % of phosphine ligand and 30 equiv of DBU as base were used to afford the desired fluoranthene derivatives. 1-Naphthylboronic acid and 1,2-dibromobenzene in the presence of Pd2(dba)3 (20 mol %) and PCy3 (80 mol

Unveiling the regioselectivity of rhodium(I)-catalyzed [2 + 2 + 2] cycloaddition reactions for open-cage C₇₀ production

• Cristina Castanyer,
• Anna Pla-Quintana,
• Anna Roglans,
• Albert Artigas and
• Miquel Solà

Beilstein J. Org. Chem. 2024, 20, 272–279, doi:10.3762/bjoc.20.28

• group was substituted by a mesyl substituent and BIPHEP was used as a model phosphine ligand instead of Tol-BINAP to reduce the computational cost. The calculations, conducted at the B3LYP-D3/cc-pVTZ-PP(SMD=o-DCB)//B3LYP-D3/cc-pVDZ-PP level (see full computational details in Supporting Information File

C3-Alkylation of furfural derivatives by continuous flow homogeneous catalysis

• Grédy Kiala Kinkutu,
• Catherine Louis,
• Myriam Roy,
• Juliette Blanchard and
• Julie Oble

Beilstein J. Org. Chem. 2023, 19, 582–592, doi:10.3762/bjoc.19.43

• . Unfortunately, with this catalyst, repeatability problems were detected (yield fluctuation of approximately 20%) which could be assigned to the low solubility of this catalyst in toluene. In order to overcome these problems, we synthesized triruthenium carbonyl complexes with phosphine ligand(s), namely

• °C in toluene for 1 h with 0.33 equiv of comp4 [Ru3(CO)11(PPh3)], a catalyst analogue to comp1 but bearing a less expensive phosphine ligand (Scheme 5A). The chosen ratio of imine to catalyst was consistent with the stoichiometric amounts needed to form the postulated intermediate. The temperature of

• 40 °C. The phosphine ligand (574.40 mg, 2.19 mmol, 1 equiv) dissolved in THF (0.11 M) was then added to the middle. The mixture was stirred at room temperature and treated dropwise with a solution of sodium benzophenone ketyl (about 0.05 equiv added) in THF (0.027 M) via a syringe until the phosphine

Transition-metal-catalyzed domino reactions of strained bicyclic alkenes

• Austin Pounder,
• Eric Neufeld,
• Peter Myler and
• William Tam

Beilstein J. Org. Chem. 2023, 19, 487–540, doi:10.3762/bjoc.19.38

• used directly which showed comparable yields. The authors also reported preliminary results for an asymmetric variant of the reaction using (R,R)-Ph-BPE as a chiral ligand. Although the use of the chiral phosphine ligand resulted in slightly diminished yields, the authors were able to achieve ees up to

• catalytic cycle starts with a diaryl Fe(II)–(S,S)-chiraphos complex 80 being generated through the reduction of FeCl3 with excess diarylzinc in the presence of the phosphine ligand. Side-on coordination to the exo face of the azabicycle 77a generates 81 where subsequent migratory insertion affords the alkyl

Diametric calix[6]arene-based phosphine gold(I) cavitands

• Gabriele Giovanardi,
• Andrea Secchi,
• Arturo Arduini and
• Gianpiero Cera

Beilstein J. Org. Chem. 2022, 18, 190–196, doi:10.3762/bjoc.18.21

• phosphine ligand implanted on the aromatic ring (entry 5, Table 1). Interestingly, this effect was substantially improved with the use of the calix[6]arene-based complex C(AuCl)2 (entry 6, Table 1). Overall, the ortho-substituted macrocycle C(AuCl)2 displayed an enhanced selectivity, with respect to the

Catalyzed and uncatalyzed procedures for the syntheses of isomeric covalent multi-indolyl hetero non-metallides: an account

• Ranadeep Talukdar

Beilstein J. Org. Chem. 2021, 17, 2102–2122, doi:10.3762/bjoc.17.137

• were taken as partners in a Buchwald coupling (Scheme 22a) [44]. On the other hand, in 2015, Organ’s group performed a phosphine-ligand free Buchwald amination of 5-chloroindole (164) with amine 165 to give the desired product 167, where the use of the Pd-PEPPSI-IPentCl precatalyst 166 in presence of

Recent advances in palladium-catalysed asymmetric 1,4–additions of arylboronic acids to conjugated enones and chromones

• Jan Bartáček,
• Jan Svoboda,
• Martin Kocúrik,
• Jaroslav Pochobradský,
• Alexander Čegan,
• Miloš Sedlák and
• Jiří Váňa

Beilstein J. Org. Chem. 2021, 17, 1048–1085, doi:10.3762/bjoc.17.84

• , under conditions similar to those developed by Stoltz et al. for pyridine-oxazolines (Table 32) [60]. Catalytic systems based on bisoxazoline ligands In 2012, the Minnaard group followed up their pioneering work with the phosphine ligand L2 to expand the substrate scope to 3-substituted enones [14]. At

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• ] cycloadditions, which are usually under substrate-control. Remarkable innovation of the stereoselective palladium-catalyzed trimethylenemethane cycloaddition reported by Trost’s group, which makes use of catalytic amounts of palladium and chiral phosphine ligand 74, was applied successfully in the

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• strategy via the transfer of sp3 chirality of 27 into the bowl chirality of 28 as a key conversion (Scheme 3) [17][31]. In this context, they began with the Pd-catalyzed hydrosilylation reaction using HSiCl3 at −3 °C in the presence of a chiral phosphine ligand to furnish the hydrosilylated product which

Regioselective cobalt(II)-catalyzed [2 + 3] cycloaddition reaction of fluoroalkylated alkynes with 2-formylphenylboronic acids: easy access to 2-fluoroalkylated indenols

• Tatsuya Kumon,
• Miroku Shimada,
• Jianyan Wu,
• Shigeyuki Yamada and
• Tsutomu Konno

Beilstein J. Org. Chem. 2020, 16, 2193–2200, doi:10.3762/bjoc.16.184

• resulted in the sluggish formation of the fluoroalkylated indenols or indanone (Table 1, entries 7–9). When 1,3-bis(diphenylphosphino)propane (dppp) was used as a phosphine ligand, the desired indenol 3aA was obtained in a moderate yield and with high regioselectivity of 98:2, together with a very small

Synergy between supported ionic liquid-like phases and immobilized palladium N-heterocyclic carbene–phosphine complexes for the Negishi reaction under flow conditions

• Edgar Peris,
• Raúl Porcar,
• María Macia,
• Jesús Alcázar,
• Eduardo García-Verdugo and
• Santiago V. Luis

Beilstein J. Org. Chem. 2020, 16, 1924–1935, doi:10.3762/bjoc.16.159

• additional phosphine ligand produced a clear positive effect on the activity, enhancing the catalytic performance of the immobilized NHC–Pd complexes assayed as clearly shown in the kinetics profiles depicted in Figure 1. Both NHC–Pd–RuPhos catalysts showed an activity increase: ca. 10-fold for 8a and ca

Recent advances in Cu-catalyzed C(sp³)–Si and C(sp³)–B bond formation

• Balaram S. Takale,
• Ruchita R. Thakore,
• Elham Etemadi-Davan and
• Bruce H. Lipshutz

Beilstein J. Org. Chem. 2020, 16, 691–737, doi:10.3762/bjoc.16.67

• ]. Following this report, Oestreich and co-workers examined asymmetric additions of silicon to unsaturated ketones 113 using P–N-type ligand L13. However, the background reaction of the silyl–zinc reagent was predominant leading to poor chirality transfer from the phosphine ligand L13, giving essentially the

• either CuCl/quinoxP* or their in-house-developed chiral sulfoxide phosphine ligand (SOP). Excellent diastereo- and enantioselectivities were obtained. A gram scale synthesis of (S)-naproxen was also described as a “real world” application [106]. From previous findings involving trapping of a vinylarene

Rhodium-catalyzed reductive carbonylation of aryl iodides to arylaldehydes with syngas

• Zhenghui Liu,
• Peng Wang,
• Zhenzhong Yan,
• Suqing Chen,
• Dongkun Yu,
• Xinhui Zhao and
• Tiancheng Mu

Beilstein J. Org. Chem. 2020, 16, 645–656, doi:10.3762/bjoc.16.61

• completing the catalytic cycle. Conclusion An efficient and facile Rh-based catalytic system composed of a commercially available Rh salt, RhCl3·3H2O, a phosphine ligand PPh3, and a base Et3N, was evaluated for the synthesis of arylaldehydes via the reductive carbonylation of aryl iodides using CO as

• of China, Beijing 100872, China 10.3762/bjoc.16.61 Abstract The reductive carbonylation of aryl iodides to aryl aldehydes possesses broad application prospects. We present an efficient and facile Rh-based catalytic system composed of the commercially available Rh salt RhCl3·3H2O, PPh3 as phosphine

• ligand, and Et3N as the base, for the synthesis of arylaldehydes via the reductive carbonylation of aryl iodides with CO and H2 under relatively mild conditions with a broad substrate range affording the products in good to excellent yields. Systematic investigations were carried out to study the

Architecture and synthesis of P,N-heterocyclic phosphine ligands

• Wisdom A. Munzeiwa,
• Bernard Omondi and
• Vincent O. Nyamori

Beilstein J. Org. Chem. 2020, 16, 362–383, doi:10.3762/bjoc.16.35

• ] among other fields (Table 1). There is a number of review articles in the literature [9][10][11] which explore deeper into the applications of P,N-heterocyclic phosphine ligands. Besides, the inclusion of other heteroatoms in the phosphine ligand skeleton opens up many possibilities for metal

• bis(2-pyridylphenylphosphino)methane (dpypm, 19) as shown in Scheme 3. Ligands 15 and 16 were prepared from intermediate 14, which in turn was obtained upon treating 2,6-dichloropyridine (13) with the generated lithium phosphide reagent. The phosphine ligand 15 was obtained by reacting

• were induced by reacting with zinc iodide and they could exist in the complexed state as structures 115 and 116. The substituents on the amine nitrogen affect the reaction conditions as well as the stability of the P–N bond. Wassenaar et al. [22] reported on a flexible click-phosphine ligand (120

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• excellent yields with easy to separate byproducts. A year later, the same catalyst was employed for the nucleophilic fluorination of aryl bromides and iodides with AgF and KF [54]. Meanwhile, with a slight modification of the phosphine ligand, Buchwald developed a similar Pd(0) precatalyst [L2Pd]2(cod

• trifluoromethylation of vinyl triflates and nonaflates (Scheme 65). A variety of trifluoromethylated cyclohexenes were obtained using a catalyst system, which was composed of Pd(dba)2 or [(allyl)PdCl]2 and the monodentate biaryl phosphine ligand t-BuXPhos. Also, TMSCF3 and KF were more suitable to the

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

Aqueous olefin metathesis: recent developments and applications

• Valerio Sabatino and
• Thomas R. Ward

Beilstein J. Org. Chem. 2019, 15, 445–468, doi:10.3762/bjoc.15.39

• , the presence of a Brønsted acid led to the protonation of one phosphine ligand rather than reacting with the ruthenium alkylidene moiety. Scavenging of the trialkylphosphine moiety resulted in a more active complex capable of initiating the ROMP of 2,3-difunctionalized norbornadienes and 7-oxo

The influence of the cationic carbenes on the initiation kinetics of ruthenium-based metathesis catalysts; a DFT study

• Magdalena Jawiczuk,
• Angelika Janaszkiewicz and
• Bartosz Trzaskowski

Beilstein J. Org. Chem. 2018, 14, 2872–2880, doi:10.3762/bjoc.14.266

• generation Grubbs catalyst (GrI) and M1 indenylidene catalyst (Ind). New complexes were formed by replacing one PCy3 phosphine ligand with the cationic NHC 1–3 (Scheme 1). We considered only the dissociative mechanism of initiation, in agreement with the numerous reports on the initiation of Grubbs catalyst

• [57], but we also considered the possibility of cationic carbene dissociation as the first step of the metathesis catalytic cycle (Scheme 3). The results of the computational study are presented in Table 2 and show that in all cases the energy barriers for the dissociation of phosphine ligand (∆G2

Photocatalyic Appel reaction enabled by copper-based complexes in continuous flow

• Clémentine Minozzi,
• Jean-Christophe Grenier-Petel,
• Shawn Parisien-Collette and
• Shawn K. Collins

Beilstein J. Org. Chem. 2018, 14, 2730–2736, doi:10.3762/bjoc.14.251

• heteroleptic copper(I)-based complexes for photocatalysis. Evaluation of the library of copper-based complexes in photocatalytic alcohol→bromide conversion. Reactions irradiated with 394 nm light (pink) or 450 nm (blue). Front entries without an indicated phosphine ligand pertain to homoleptic Cu(diamine)2BF4

Hypervalent organoiodine compounds: from reagents to valuable building blocks in synthesis

• Gwendal Grelier,
• Benjamin Darses and
• Philippe Dauban

Beilstein J. Org. Chem. 2018, 14, 1508–1528, doi:10.3762/bjoc.14.128

• reductive elimination. Starting from the ortho-N-(acyl)diaryl-λ3-iodanes 57, a combination of copper and palladium catalysis, in the presence of a phosphine ligand, induces the internal O-arylation of the proximal amide moiety, followed by a subsequent metal-catalyzed coupling-reaction with the resulting Ar

• cyclic diaryl-λ3-iodanes (Scheme 26) [66]. The palladium phosphine ligand plays a crucial role as a bidentate ligand with a bite angle greater than 100° such as DPEphos (104°) or Xantphos (108°) significantly improves the yields. The reaction applies to a series of anilines and aliphatic amines, but

Copper-catalyzed asymmetric methylation of fluoroalkylated pyruvates with dimethylzinc

• Kohsuke Aikawa,
• Kohei Yabuuchi,
• Kota Torii and
• Koichi Mikami

Beilstein J. Org. Chem. 2018, 14, 576–582, doi:10.3762/bjoc.14.44

• fluoroalkylated pyruvates is shown with dimethylzinc as a methylating reagent in the presence of a copper catalyst bearing a chiral phosphine ligand. This is the first catalytic asymmetric methylation to synthesize various α-fluoroalkylated tertiary alcohols with CF3, CF2H, CF2Br, and n-CnF2n+1 (n = 2, 3, 8

• copper. Keywords: asymmetric methylation; chiral phosphine ligand; copper catalyst; dimethylzinc; trifluoropyruvate; Introduction The introduction of fluorine atoms into organic compounds plays an important role in the discovery of lead candidates with unique biological and physicochemical properties

• , CF2Br, and n-CnF2n+1 (n = 2, 3, 8) groups. Results and Discussion Our initial investigation was focused on the methylation of ethyl trifluoropyruvate (1a) with Me2Zn in the presence of a copper salt bearing a chiral bidentate phosphine ligand (Table 1). We were delighted to find that the reaction

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation. Part 1: Use of CF₃SO₂Na

• Hélène Guyon,
• Hélène Chachignon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2764–2799, doi:10.3762/bjoc.13.272

Direct catalytic arylation of heteroarenes with meso-bromophenyl-substituted porphyrins

• Alexei N. Kiselev,
• Olga K. Grigorova,
• Alexei D. Averin,
• Sergei A. Syrbu,
• Oskar I. Koifman and
• Irina P. Beletskaya

Beilstein J. Org. Chem. 2017, 13, 1524–1532, doi:10.3762/bjoc.13.152

• partially reduced by the phosphine ligand. The application of another catalytic system with Pd(0), Pd(dba)2/DavePhos (20:22 mol %, dba = dibenzylideneacetone) together with a 100% excess of benzothiazole was more successful as it afforded 32% yield of compound 3 (Table 1, entry 2); it is interesting that

• catalytic conditions proposed by Osuka for the β-arylation of porphyrins with bromoarenes [28] and investigated the reactions of the zinc porphyrinates 1 and 2 with benzoxazole (2 equiv) or benzothiazole (2 equiv) in the presence of Pd(OAc)2 (20 mol %) without phosphine ligand with pivalic acid as an

• catalytic cycle proceeds via Pd(II) after oxidative addition. However, Pd(dba)2 as a source of Pd(0) may be unfavorable in the absence of the phosphine ligand and in situ reduced palladium is sometimes more preferable. A better result obtained with Pd(PPh3)4 supports this consideration. In our further

Unpredictable cycloisomerization of 1,11-dien-6-ynes by a common cobalt catalyst

• Abdusalom A. Suleymanov,
• Dmitry V. Vasilyev,
• Valentin V. Novikov,
• Yulia V. Nelyubina and
• Dmitry S. Perekalin

Beilstein J. Org. Chem. 2017, 13, 639–643, doi:10.3762/bjoc.13.62

• cycloisomerization in the presence of the cobalt catalytic system CoBr2/phosphine ligand/Zn/ZnI2 giving cyclohexene, diene or cyclopropane structures depending on the type of the phosphine ligand. This unpredictable behaviour suggests that, although the availability of the cobalt catalytic system is appealing, the

• /phosphine ligand/Zn/ZnI2 for the carbon–carbon bond formation has become a subject of a growing interest (for reviews see [15][16][17][18][19][20][21]). This catalytic system has many advantages, including the availability of the cobalt salts and high tolerance to organic functional groups (for some recent

• examples see [22][23][24][25][26][27]). However, it has been noted that the direction of the catalytic reactions often depends on the structure of the phosphine ligand. Major research on these ligand-controlled reactions has been made by the groups of Hilt and Cheng, in particular, on the selective